The 8 Best MIPS Snow Sport Helmets in 2026

For riders choosing among MIPS helmets, the SMITH Vantage 2 pairs MIPS with ASTM F2040 and CE EN 1077:2007 certification. Its BOA 360 fit adjustment and Smith Goggle Integration add practical fit and eyewear details, while 40 vents use dual-regulator adjustment. These published features make it worth considering if you want MIPS plus adjustable ventilation; they do not establish comparative impact performance or comfort.

Its three-piece hybrid shell sets it apart from the in-mold SMITH Descend MIPS Snow Sport Helmet, which also lists MIPS, Smith Goggle Integration, and adjustable front and rear vent control. Choose between them based on construction and ventilation setup, not an assumed safety advantage. The Vantage 2 listing is for a Small in Matte Chalk, so check that size against your head measurement before choosing it.

For a MIPS helmet with named snow-sport certifications, the SMITH Nexus lists MIPS, ASTM F 2040, and CE EN 1077:2007 Class B. Its BOA 360 Fit System lets you adjust the fit, and one reviewer praised its comfort and reduced pressure points. It also lists Smith Goggle Integration, a useful detail if you want to pair it with Smith eyewear.

The Nexus is a hybrid helmet with 24 adjustable vents, but the supplied tester summary gives a different vent count, so treat the exact count as unresolved. If you want a documented vent-control setup instead, the SMITH Vantage 2 MIPS Snow Sport Helmet lists 40 vents with dual-regulator adjustment. Both list MIPS, but their ventilation configurations differ.

For a MIPS snow helmet with adjustable airflow, the SMITH Descend MIPS pairs MIPS with ASTM F2040 and CE EN 1077:2007 certifications. Its dial fit system and adjustable front and rear vents let you tune fit and airflow. The listed Smith Goggle Integration is useful if you use compatible Smith eyewear.

Its listed weight is 28.8 oz, so consider that figure if helmet weight matters to your choice. For a different vent setup, the SMITH Vantage 2 MIPS Snow Sport Helmet lists 40 vents with dual-regulator adjustment and the same two certification designations.

For riders comparing MIPS helmets, this SMITH Level pairs MIPS with ASTM F 2040 and CE EN 1077:2007 Class B certifications. Its VaporFit dial lets you adjust the fit, and Smith eyewear integration may suit shoppers already using Smith goggles. The 20 adjustable vents also let you change airflow.

One buyer said the fit ran a bit small and sized up, so check the fit carefully before settling on a size. If you want a listed ventilation count of 24 instead, the SMITH Nexus Snow Sport Helmet is another MIPS option, with ASTM F 2040 and CE EN 1077:2007 Class B certification.

For a MIPS snow helmet with a dial-adjustable fit, the SMITH Summit pairs MIPS with a BOA 360 Fit System and Smith Goggle Integration. Its listed certifications include ASTM F 2040 and CE EN 1077:2007 Class B. That mix suits shoppers who want named rotational-impact technology alongside a fit adjustment they can fine-tune.

The listed weight is 16 oz, which may feel substantial if keeping helmet weight down is a priority. For comparison, the POC Fornix MIPS Snow Sport Helmet is listed at 17.6 oz, so the Summit is lighter on the published figures, though fit and comfort still depend on the wearer.

For MIPS-focused shoppers, the POC Obex MIPS pairs MIPS Evolve with EN 1077-B, ASTM F2040, and UKCA certifications. Its 360° Fit System lets you adjust the fit, while adjustable vents and a goggle clip cover practical on-mountain needs. Field testers reported comfort, though that evidence does not establish fit for every head shape.

One reviewer found the Obex less plush than the SMITH Level MIPS Snow Sport Helmet. Choose the Obex if its fit and listed certifications suit your needs; consider the Smith if plushness is your priority, while noting that the comparison reflects one reviewer rather than a direct test.

For shoppers choosing among MIPS snow helmets, the POC Fornix MIPS pairs named rotational-impact protection with ASTM F2040 and EN 1077 Class B certifications. Its listing also describes aramid bridges intended to strengthen penetration protection. Those claims make it a useful option if you want these specific listed protections together, though they are not independent test results.

The selected M-L version is listed with a 360° Fit adjustment system, adjustable vents, a goggle clip, and a weight of 17.6 oz. Check the size against your head measurements before choosing; the supplied specifications do not give a circumference range. If listed weight matters to your choice, the POC Obex MIPS Snow Sport Helmet has no weight value in this comparison, so there is no supported weight-based distinction between the two.

For riders comparing MIPS snow helmets, the OutdoorMaster Kelvin II pairs listed MIPS protection with an ASTM certification and an adjustable dial fit. Its reported 22.83–24.41 in range applies to this Large, Matte Black configuration, so check your head measurement against that range before choosing it. The 14 vents are listed, but their adjustability is not specified.

Goggle fit is the main trade-off: OutdoorGearLab reported gaps and backward tilt while riding. OutdoorMaster says the helmet is designed for its ski goggles, but that does not resolve the reported fit concern with other setups. If you want another MIPS option with a named goggle system, the SMITH Descend MIPS Snow Sport Helmet lists Smith Goggle Integration and adjustable front and rear vent control.