Specifications
| Brand | Shark |
|---|---|
| Compatible Surfaces | Marble, Tile, Stone, Sealed Hardwood |
| Steam Settings | 3 Settings |
| Cord Length | 19 ft |
| Weight | 6.9 lb |
| Cleaning Path Width | 14.5 in |
Pros
- Consistent steam cleaning
- Useful steam settings
- Wide cleaning path
Cons
- Corner cleaning limits
- Dwell-time sanitization
The Verdict
The Shark Steam & Scrub S8001 is a steam mop aimed at large floor cleaning, with a 14.5 in cleaning path that cuts down on repositioning. It scores 8.2 for cleaning performance thanks to consistent steam and 3 steam settings, but it struggles at edges, so you may need extra passes or tools for corners.
Who it's for: Homeowners who clean mostly sealed hard floors and want fewer trips across the room, accepting limited corner reach and doing some touch-up along edges.
Who should skip it: People who rely on steam mop edge-to-edge sanitizing for tight spaces, since dwell-time sanitization is a concern and corners do not get the same attention.
In-Depth Review
Cleaning Performance
The Shark Steam & Scrub S8001 earns a 8.2 in Cleaning Performance, landing in the “Consistent steam cleaning” range. In day to day use, it keeps steam coming at a steady rate so you are not stuck doing repeated wet wipe cycles to chase grime.
Three steam modes help you match the heat to the job. You get 3 steam settings for Light, Normal, and Deep cleaning, which matters on sealed floors where you want more heat for dried spills but not too much for everyday dust. The cleaning path is also wide at 14.5 in, so you can cover more area per pass when the mess is spread out.
Where performance tightens is not on stain removal itself, but on the floor edges. The controls and steam modes do not change the basic geometry of the head, so corners and tight edges tend to need extra attention.
Ease of Use
With an 8.2 Ease of Use score, this mop fits the “Quick heat-up and fill” style. The key practical numbers here are handling and reach. The unit weighs 6.9 lb, which keeps it from feeling heavy in longer sessions.
Reach also helps you clean without constant repositioning. The cord length is 19 ft. That is long enough to span typical living rooms and hallways without unplugging, assuming standard outlet placement. Pair that with the 14.5 in cleaning path, and the mop spends more time moving forward and less time resetting your stance.
The steam settings are simple to work through since there are 3 modes total. That reduces the mental load when you switch from light daily cleaning to deeper work on sticky spots.
Build Quality
Build Quality scores 7.0, which falls into “Reliable seals and triggers” rather than anything sturdier. I cannot call the construction overbuilt based on the available details, but the design logic is clear. A steam mop lives or dies on how well it manages water and pressure, and the system here focuses on controlled steam output across the usable modes.
From a practical standpoint, the mop is not overly bulky. At 6.9 lb, it is light enough that you do not feel like you are fighting the unit. The cleaning head width of 14.5 in also means less stress from constant steering corrections, which can indirectly help long-term wear on moving parts.
There are 3 steam settings to cover different cleaning levels. More modes means more control points, so consistent operation matters. Still, most wear will show up where you grip and where you guide the head, not in the steam mode selection.
Versatility
Versatility rates at 8.0, matching “Works across sealed floors.” The mop is intended for sealed hard surfaces, listed as Marble, Tile, Stone, and Sealed Hardwood. That is a broad set for a steam mop, since each surface can react differently to moisture and residue.
The 3 steam settings matter for versatility more than you might expect. Light settings are better suited to daily cleanup, while Deep mode makes sense for tougher, more baked on grime. This mix keeps the mop usable when you are switching between a kitchen floor and a more sensitive space.
The wide 14.5 in cleaning path also supports versatility by reducing the time needed per area. Less time with the head in contact with the floor can help you manage how much steam exposure accumulates as you move from room to room.
Value
Value comes in at 7.8 and fits “Strong value, dependable.” The product is aimed at practical, repeatable cleaning, not just sanitizing on paper. The main strength for value is consistency. The core promise is “Consistent steam cleaning,” paired with 3 steam settings so you can tackle both light grime and heavier spots.
You also get helpful throughput for the format. The cleaning path width is 14.5 in, which reduces the number of passes when you are clearing larger spaces. Add the 19 ft cord length, and fewer interruptions slow down less often.
Even with good overall value, there is a clear trade-off. “Corner cleaning limits” and edge work still require extra time. This is a geometry and reach issue, not a setting issue. If your floors have lots of tight trim lines, plan on doing some follow up with the head angled or by using a secondary tool for edges.
Frequently Asked Questions
Is the Shark Steam and Scrub S8001 safe to use on sealed hardwood and tile?
Yes, Shark lists sealed hardwood, marble, tile, and stone as compatible surfaces. The mop uses steam, so it is still smart to confirm your specific floor is sealed and to avoid prolonged soaking. For best results, use short passes and let the floor dry normally.
How wide is the cleaning path on the Shark S8001 steam mop?
The S8001 has a 14.5 inch cleaning path width. This can help you cover more area per pass on open floor space.
Does the Shark S8001 reach corners and grout well?
It can struggle with corners because the cleaning head covers a wider area and does not fully reach tight spaces. For grout lines or edges, you may need extra effort with a smaller tool or careful repositioning. Plan for some spot cleaning along borders.
What steam settings does this mop include?
The S8001 offers 3 steam settings. Use the lowest setting for light daily dirt and increase it for stickier residue, while keeping an eye on how wet the floor feels.
How long is the power cord on the Shark S8001?
The cord length is 19 ft. This usually reduces the need for frequent outlet changes in typical rooms, but you may still need to reposition for long hallways.
Does this steam mop sanitize by letting steam sit on the floor longer?
The cleaning relies on moving steam over the surface rather than holding steam in place. If your goal is dwell-time sanitization, you may need a different approach or tool, since this model is not designed for extended steaming in one spot.
Final Verdict
Shark Steam and Scrub S8001 is a solid pick for sealed hard floors and routine messes. Steam stays consistent, and the cleaning path covers a lot per pass, which helps you finish faster. Still, it struggles in tight corners, so you may need edge tools or extra effort for grout lines and baseboards. Overall, it suits busy households that want reliable everyday steam cleaning.
If you have mostly open floor space and want steady steam plus adjustable settings, this mop fits well. If corners and sanitizing dwell time matter most, look elsewhere.
