Mammut Togir 2.0 3 Slide Women’s Medium Climbing Harness Review

Safety

With a Safety score of 8.3, the Mammut Togir 2.0 3 Slide Women Medium feels like it earns trust in use. The official certification listed on the harness is CE EN 12277 Type C and UIAA. That matters, because it is the baseline for how confidently the harness should behave when loaded.

In practice, the biggest safety story here is buckle confidence under weight. The review pros already call out “Confident, secure buckles,” and that aligns with what you want during belays and hangs. This harness also uses three Slide system points (as shown by the “3 Slide” naming), and the leg loops are adjustable, which helps you set a stable fit before climbing.

There is one concern to keep in mind: the cons list “Leg-loop retainer omission.” The lack of a retainer can change how the leg loops behave during dynamic movement. If your climbing includes lots of high steps, repositioning, or gear shuffling that can twist the harness, you may notice more leg-loop drift than you would with a retainer. The Safety score stays strong because the core retention through the main system still feels solid, but this is the trade-off you should plan around.

Comfort

Comfort scores 8.5, in the “great” range. The pros mention “Even pressure, breathable fit,” and those are the exact traits that tend to show up once you have real time on the harness. The harness uses adjustable leg loops (adjustable_leg_loops is explicitly listed as “Yes”), so you can tune fit to reduce pressure points.

That matters during the sessions where you feel everything. A well set waist and leg loop should stay in place as you move. With adjustable leg loops, you can dial out extra slack that can cause shifting, and also avoid over-tightening that creates hot spots. The harness has 4 gear loops total, which is not directly comfort-related, but it helps you distribute where your weight and reach go. Fewer awkward dangles can mean fewer moments where you shift your hips to manage rope and gear.

The cons are also comfort-adjacent. “Leg-loop retainer omission” is not just a safety note. When a harness lacks a retainer, it can allow more loop movement during stepping and lunging. On long days, that movement can translate to minor readjustments. With a breathable fit, you can still stay comfortable, but the retainer absence may nudge you toward more frequent tightening checks.

Build Quality

Build quality earns 8.6. That score matches the stated durability cues in the specs we can verify: the certifications are listed as CE EN 12277 Type C and UIAA, and the harness is built around the Mammut Togir 2.0 platform with a 3-slide layout. Those certifications confirm the harness meets recognized strength and performance requirements.

From the product and review side, the pros include “Durable, well-finished hardware.” While we do not have raw material percentages or weight in ounces from the spec table here, we do have a verified gear-loop count of 4 and a clearly defined adjustability system. In day-to-day use, that usually translates to hardware that holds its shape and functions smoothly, without sloppy finishes that can irritate contact points or lead to early wear.

One more spec fact helps anchor quality expectations: the harness uses a stable configuration of 2 stable gear loops plus 2 ultra-lightweight gear loops, totaling 4 gear loops. That split can matter for wear. Heavier loads tend to ride the stable loops, while lighter gear hangs on the lighter loops. Over time, that can reduce stress concentration on the same attachment points.

Features

Features score 8.3, which lands in “great.” The most concrete wins show up in the usable layout and adjustability. You get 4 gear loops total, with the source explicitly describing “2 stable gear loops and 2 ultra-lightweight gear loops.” That gives you a more practical mix for sport and gym days, where you want quick access to carabiners, draws, or small tools.

The harness also includes adjustable leg loops, which is confirmed as “Yes.” That is not a minor detail. The Togir 2.0 3 Slide system depends on correct sizing, and adjustability helps you match the fit to your climbing style and clothing layers. If the harness rides too low or too high, you will feel it fast during belays and longer routes.

On the negative side, the one clear feature gap is “Leg-loop retainer omission.” This is the kind of missing detail that can matter for certain movement patterns. If you frequently stand, swing your hips, or manage gear with your legs, you may miss the extra control a retainer gives. Still, for most sport and gym use, the 4-loop layout plus adjustable leg loops hits the practical sweet spot.

Value

Value scores 8.1, which maps to “worth it for most climbers.” The main reason is simple: the harness delivers strong comfort and safety confidence together, without needing extra gimmicks. The certified standard listed is CE EN 12277 Type C and UIAA, and the comfort story is supported by “Even pressure, breathable fit.” Those two points together help justify the overall performance-to-spec balance.

Build quality also looks consistent with that value outcome. The pros specifically call out “Durable, well-finished hardware,” and the harness includes 4 gear loops in a rational layout. That matters because gear management is a real part of how a harness feels over time. If loops are placed poorly or the system feels fiddly, comfort and safety scores can drop quickly in real use.

The trade-off behind the value score stays focused. “Leg-loop retainer omission” can push some climbers to look elsewhere, especially if you rely on leg-loop control for movement or gear handling. For everyone else, the mix of adjustable leg loops (adjustable_leg_loops is “Yes”), secure buckle confidence, and a stable 4-loop configuration supports why the harness lands at “worth it” rather than slipping into “decent, but overpriced.”